Roundness

[[Pe...]]

Hello everyone, 

Can you please tell me, if it´s possible change coordinate system in inspection details according to my local coordinate system? 

Thank you,

 

P. 

 

[[Jo...]]

Hi Peter,

i have not used it in this context, but maybe it works.

https://techguide.zeiss.com/en/zeiss-inspect-2025/article/cmd_view_use_local_csys_for_viewing.html

 

[[Pe...]]

Hi Jochen,

thank you for the advice,

so in the end I solved it by adjusting the global coordinate system together with the designer, since the Inspection Details only display that one.

[[Jo...]]

I tried building different alignments and switching them and it changes the orientation under inspection details for roundness (inspect 2026).

The coordinate system symbol is still the same but the circle is clearly moving relativ to it, when switching alignments.

 

Btw. you can change the base coordinate system of the cad in inspect. You should do it before anythig else.

 

[[Ma...]]

I would remove that alignment picture from report page.

Or you would need to create coordinate alignment ( 1x nominal / 1x actual ) -> create part alignment by them -> display roundness in that new alignment