"33 Collision" While Qualifying Probe

[[Fr...]]

I created a new probe and during qualification, I keep getting a "33 Collision: Possible loss of commands" part way through the qualification.  It makes a few passes around the qualification sphere, but then for some reason errors out after a few passes.  Anyone have an idea why this would be happening? I've checked other probes and they qualify perfectly without any issues. This is a 3x125mm Silicon Nitride probe if that makes a difference.

Edited 3 hours ago
additional information

[[Ri...]]

Is this a 3x125mm star probe or is the stylus facing the -Z?

[[Fr...]]

Down probe only, -Z

[[Ri...]]

If you turn the "speed-knob" down, will it run all the way through?

[[Fr...]]

I turned the speed knob down to about a quarter, and it seemed to get a bit further, but ultimately gave me the same error again.

[[Fr...]]

Same probe qualified on a different Duramax, same result.

[[Ri...]]

Hmm. I've never really seen it do that just because the stylus is that flexible. You could try turning it to Sensitive and Probing Dynamics to 10% to see if that helps. 

[[Fr...]]

That did it!!  Thank you Richard for all your help, it's greatly appreciated.