Calypso 2025 Profile of Multiple Features

[[Ad...]]

This is probably pretty basic stuff, but how do I take a profile measurement of a composite of multiple features?

I'm using Calypso 2025, and do not have FreeForm.

Attached a snippet of the feature I'm trying to measure. Need a profile of the entire perimeter, despite what the drawing may suggest:

Edited 4 hours ago

[[Ma...]]

I think you can create profile callout on every feature, then report Max ( or in ASME Max and Min ) from those characteristics.

I have no exp without FF so i don't know how others are dealing with this.

[[Za...]]

Without the FreeForm license, here is an article on how to get a profile result...

https://portal.zeiss.com/knowledge-base?id=2495545

[[Jo...]]

Considering that is a fully constrained DRF, each unique feature can be evaluated separately. You can then use the max and min result elements to report the specific max profile deviation. If you then want to just report the max result, you can “Mark” the other characteristics (which will hide them from the report). Be sure to also check the “Hide” button in the multiple reports screen.