[Ch...] Posted Wednesday at 01:57 PM Share Posted Wednesday at 01:57 PM Hello, I received a measurement plan from another manufacturing site, and when running the plan, I am met with the following error message at the end of the run. The CNC is disabled and the PIWeb report will not print. Where do I access PostSettings in Calypso2025 so I can change this file path? There is no X Drive mapped to this PC. Link to comment Share on other sites More sharing options...
[Lu...] Posted Wednesday at 02:16 PM Share Posted Wednesday at 02:16 PM Hi Christian, It is probably in this menu: Link to comment Share on other sites More sharing options...
[Ch...] Posted Wednesday at 03:07 PM Author Share Posted Wednesday at 03:07 PM Please sign in to view this quote. Thank you for the direction Lucas. It appears that the measurement plan was written with the PCM license, but the machine I am using does not. Is there a simple way to remove all PCM features? Link to comment Share on other sites More sharing options...
[Ri...] Posted Wednesday at 04:59 PM Share Posted Wednesday at 04:59 PM Make a backup, but you can just delete the inspset file inside of the measurement plan folder. You can also manually edit the inspset file and remove everything inside of "#parameters:" If you delete the file, it will also reset things that you might have had setup, mainly things regarding the file output and header parameters. Link to comment Share on other sites More sharing options...
[ni...] Posted 10 hours ago Share Posted 10 hours ago nice, so we can write some PCM code without licence Link to comment Share on other sites More sharing options...
[Ri...] Posted 7 hours ago Share Posted 7 hours ago Yes, but there are still some commands that absolutely require the PCM license (read/runPCMFile being the main one) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in