MAGNETIC CODED REFERENCE TARGETS

[[Ni...]]

Can someone help me out. I need to purchase some of the 3.0mm Coded Reference Targets. I have some of the Sticker ones Item Number:000250-0004-726. I need the same ones as those just magnetic.

 

[[Ma...]]

You would need to find some local shop.

We are using normal sticky ones, but we placed it on classic table magnet and used transparent coating to keep better cleaning and not spending too much on them 😄

 

[[Ni...]]

So with the transparent coating it still reads them fine?

 

[[Ma...]]

I have no problem with that - as we work with sandblasted forged parts, then those points can get dirty - cleaning with wet cloth is allright and we don't need to replace them ( we also measure forging tools where we use classic cylindrical magnets with this coating )

I can not tell how much is precission affected, but since it's used mainly to translate measured data in space then it's allright

[[No...]]

How about these:

https://shop.metrology.zeiss.de/INTERSHOP/web/WFS/IMT-DE-Site/en_DE/-/EUR/ViewProduct-Start?SKU=604001-4892-000

[[Ma...]]

In this way there is this

https://shop.metrology.zeiss.com/INTERSHOP/web/WFS/IMT-US-Site/en_US/-/USD/ViewProduct-Start?SKU=000250-0004-747

[[Ri...]]

Coded reference markers are typically only used for photogrammetry. 

If you buy those uncoded 3mm reference markers, while you can make them work on the T-Scan Hawk, they are not designed to natively work on the Hawk, and it will struggle to see them at times. 

[[Ma...]]

Please sign in to view this quote.

If he says they are using them, but they are not magnetic, then it should be ok.

Also here is diameter 3 coded from 113 to 217
https://shop.metrology.zeiss.com/INTERSHOP/web/WFS/IMT-US-Site/en_US/-/USD/ViewProduct-Start?SKU=604001-2017-000&CategoryName=424110&CatalogID=400000&ExtendedNavigation=true

[[No...]]

Please sign in to view this quote.

Ooops!  It seems my mind somehow added an "un-" to the word "coded".