Base/startsystem setup

[[Ni...]]

Hello together,

 

i am currently have a problem with a setup and maybe some of you have a good Answer for it:

 

The Problem:

i have 2 shopfloor machines to set up only one program means that i use one program for the different machines with different positions for the adapterplate of the part on each machine.

 

on machine 1 i measured in the basesystem of the part and referenced it to the adapter plate (machine 1) as a Startsystem and calculated the deviation and saved the program.

For machine 1 i set up a autorun data and defined the startparameter on the startsystem of the adapter plate.

 

In this situation it works without any problems.

 

I need to put it on the other machine 2, this machine also have an adapter plate (machine 2), i did the same procedure like i did on the machine 1 and the part moved on machine 1 after i did the changes on machine 2.

 

It means 

1 program 

2 machines 

2 adapter plate with each on startsystem for the part

2 Autorun overlays 

 

I know that i can solve this problem if i do a palet system and use the startsystem for the palet(one for machine 1 and one for the machine 2) and the basesystem of the part in the autorun.

 

Is there a different possibility to do this?

 

 

if you have any questions please ask me and thank you all in advance 

 

[[Ma...]]

Why you don't want to use pallet system? There is another way, but it's the similar way as pallet program.

Only if you have some sort of similar position of that part in machine workspace, then you would need to sacrifice start system to obtain part location via simple points with big approach distance