Jump to content

True position


Recommended Posts

Datum A is based off that .290 dim and for me to get a true position on those dimensions i had to create separate datum planes off what those dimensions are based off of. When i click on the 0.140 ±0.003 the zeiss software wont let me assign a true position to it.  So, currently how I have the true positions I'm not able to use the ±0.003 to utilize the MMR 

Screenshot 2026-11-13 121508.png

Screenshot 2026-11-13 121950.png

Link to comment
https://qualityforum.zeiss.com/topic/27880-true-position/#findComment-158290
Share on other sites

It looks like you used a max and min setup inside the linear size, that is fine. What I believe it does is will use the max/min size that gives you the least bonus and passes that thru to the positional check. But you must select Material Requirement MMR in the dialog box pop up, and then use Associated Element and pick the linear size feature in the Dimensional Element:

You should see the bonus getting passed thru on the positional check...see mine.

 

 

111.png

2222.png

Link to comment
https://qualityforum.zeiss.com/topic/27880-true-position/#findComment-158410
Share on other sites

One of the things you must be careful of when using ASME/ISO style measurement strategies like finding the high points to create sizes and features like max inscribed and min circumscribed is you are at the mercy of the quality of your mesh/scan. If you have poor surface quality you are going to get bad data using those imho and would be where guassian would be more appropriate. We have extremely high quality meshes coming off the CT so sometimes on a critical feature, if we deem the surface to be clean and repeating we will use the ASME/ISO style highs to measure a feature, but not always. I'm partial to guassian myself, more repeatable, predictable and much less surprises.

 

 

BTW...I cannot tell what feature is internal/external in your picture, but your gap b/w the min and max on your linear size isn't going to work, b/c it is going to take the value that gives you the least bonus, so you may have setup your MMR correctly like my image, but due to the huge gap it is selecting the worst measurement. Try setting both to guassian and see what numbers you get for a more stable test.

Link to comment
https://qualityforum.zeiss.com/topic/27880-true-position/#findComment-158412
Share on other sites

×
×
  • Create New...