[Ra...] Posted yesterday at 07:48 AM Share Posted yesterday at 07:48 AM Hello everyone, I am working with ZEISS INSPECT Optical 3D 2025 and I need some advice on how to measure the Maximum Burr Level on an injection-molded plastic part. The technical drawing specifies a maximum burr height of 0.05 mm along the parting line. I would like to know: What is the recommended workflow in ZEISS INSPECT 2025 for measuring the maximum burr height? Is it possible to automatically detect and evaluate the maximum positive deviation along the entire parting line? How can I obtain the maximum value and include it in an inspection report? If possible, I would really appreciate a step-by-step explanation or screenshots showing the workflow. Thank you in advance for your help! Link to comment https://qualityforum.zeiss.com/topic/27906-how-to-measure-maximum-burr-level-in-zeiss-inspect-optical-3d-2025/ Share on other sites More sharing options...
[Na...] Posted 1 hour ago Share Posted 1 hour ago Hello Raul, I think with one surface curve on the "base" surface (curve 1) and a Curve from touch points (edge) on the burr (curve 3) can be used for this. Then a continuous curve distance: ZEISS Quality Tech Guide with max. label. If it is tricky to construct the curves I recommend reaching out to your local support with the project. Nanno Link to comment https://qualityforum.zeiss.com/topic/27906-how-to-measure-maximum-burr-level-in-zeiss-inspect-optical-3d-2025/#findComment-158494 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in