Jump to content

Large scale photogrammetry projects


Recommended Posts

  • 2 weeks later...

Hello Mr. Mason,

this is difficult to answer, because it depends on the focus distance, lens and resolution of your tritop system:

Simple answer: Just get sure that, the diameter of the un/coded points is about 10 pixels. Take one image at

a meaningful distance of your part and check the pixel-diameter of your points. 

Then adjust the focus distance or use larger/smaller points. 

What about the size of your part? What diameters of points are available at your site?

Best regards,

Jens Heidler

×
×
  • Create New...