Jump to content

Feedback on improving the exposure time mode feature


---
 Share

Recommended Posts

Hi.

I am measuring a battery pack case with a scanbox.

image.png.b19638c74812a99178344c71845b63b2.png

 

However, the VMR default setting of Exposure time:Automatic by CAD does not properly recognize the exposure time of a small area.

image.png.f9f5da0d669b2c8a020ff48a8f309f02.png

image.png.7b02b5b0bee9e0ace8b2d66d43e61879.png

image.png.e1d273a0611765ce5cbff68860b7bcae.png

image.png.8271fbd60ff7e228dcd285ec4cef3e4c.png

image.thumb.png.7ec4f8c55cc97da4778efd7f9f356d82.png

image.thumb.png.1e18db3e681bea993e217f081fa092c8.png

 

Automatic by CAD mode ignores the brightness of small areas.

Applying HDR+ to all elements takes too long and is heavy data.

Currently After Smart Teach, the user manually changes the brightness of some created positions to HDR+.

This solution is cumbersome.

 

I wish there was a setting to adjust the exposure time for just the tagged Elements area, like in the photo below.

ex) Exposure time mode: Automatic by Element
 

image.png.85c545df2bd453b96780297dc600952c.png

image.png.4de16bd434291892a9c6589e498965d2.png

 

Thank you.

 

Link to comment
Share on other sites

  • 4 weeks later...
 Share

×
×
  • Create New...