unilateral profile results .020 U 0 ABC

[[Ni...]]

My customer is expecting to see a negative result on the CMM report when I'm reporting a Unilateral Profile .02 U 0 ABC.

Is this correct because I keep get results within .02 but always reported in a + number. I have set my calculations to Unilateral inside.

Any help would be greatly appreciated.

[[Mi...]]

Use Bilateral with two results.

You'll get a min and max with -0.02 end +0 tolerance which should satisfy the customer

[[Ni...]]

We tried this and still got results in the positive. Therefore I'm assuming my part is not conforming?

[[Ma...]]

If there is no note on drawings, then it should be "Bilateral with unequal distribution - one result".

For reporting only one number you would need "Outwards / Inwards to infinity" - but i think it will always be positive and not unequal distributed.
As Michael mentioned - you can use "Bilateral with unequal distribution - two results"
Or use "Result element" with formula "getMaxActual("Profile1").actual" or "getMinActual("Profile1").actual"

Image aid
viewtopic.php?p=47346#p47346

[[Mi...]]

What Martin said ( I got the name a bit wrong)

This is basically what it will look like, this part is bad on the one profile

Profile.PNG