Move To Machine Home

[[Cl...]]

I'm going over all the settings in planner to make sure they match the live CMM.
What should the "Move To Machine Home" XYZ coordinates be for a Contura G2 7/7/6?

[[Ke...]]

There is no “right” answer, the position it moves to after homing can be essentially whatever works for your system. I always recommend at least 10mm from the zero point in each direction to avoid possible endlimit issues, with my default settings being X 15, Y-15, Z-15mm. I have seen others who prefer to set the X to the center of the machine (X 350).