[Ch...] Posted November 30, 2023 Share Posted November 30, 2023 I'm looking for probe recommendation's for internal splines. It has a minor diameter of 19.15mm. I was thinking a good star probe but most are too big for what I need. What do my internal spline people use to probe this? Link to comment Share on other sites More sharing options...
[Ma...] Posted November 30, 2023 Share Posted November 30, 2023 I would suggest L probe with rotary table. Link to comment Share on other sites More sharing options...
[Mi...] Posted November 30, 2023 Share Posted November 30, 2023 Since you're thinking star probe I assume you can't just probe it with a large ruby parallel to the axis of the spline? If not and you have no rotary table, a small star system, or discs if XT would be the best solution. Would have to know what the part looks like Edit: I think I made the wrong assumption that you are only trying to measure the Minor Diameter...Spline.PNG Link to comment Share on other sites More sharing options...
[Ch...] Posted November 30, 2023 Author Share Posted November 30, 2023 A little more info, I will be using gearPro and I do have a rotary tables. Link to comment Share on other sites More sharing options...
[Ch...] Posted November 30, 2023 Share Posted November 30, 2023 Yes internal L probe, try this Zeiss part # : https://shop.metrology.zeiss.com/INTERS ... 1-8160-000 you will need unthreaded probe. Good luck Link to comment Share on other sites More sharing options...
[Ch...] Posted November 30, 2023 Author Share Posted November 30, 2023 Very good info and much appreciated guys. Link to comment Share on other sites More sharing options...
[Je...] Posted December 1, 2023 Share Posted December 1, 2023 Please sign in to view this quote. Unthreaded stylii on holders like these may give you more clearance. I've had our machinists lathe off a milli or two when needed. M5 - 5 Way Styli Holder KH M5 000 11 010 https://www.itpstyli.com/OnlineShop/Pro ... M500011010 . . Star element with cone adapter, 4 X DS 1.5 626107-6280-110 https://shop.metrology.zeiss.com/INTERS ... ation=true . . You can stack multiple holders, perhaps with cone adapters, to really flex that Medusa effect. . . Link to comment Share on other sites More sharing options...
[Ün...] Posted December 1, 2023 Share Posted December 1, 2023 Star probe does not work well in small diameters. I use L probe with Ø18 hole diameter. Quite successful Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in