Change of position in Secondary alignment of CAd Model

[[ge...]]

Good afternoon
I have a program with a base alignment with the CAD model. I need to make a secondary alignment and the CAD rotates when making this secondary alignment. Is there a way to do this?

[[Ma...]]

If you are not using FF then you can manually rotate CAD model, but it's not necessarily.

I didn't use that, but it exists Master plan viewtopic.php?t=11534

[[No...]]

May I ask what you want to achive by rotating the CAD model in the middle of the program?

[[ge...]]

It is because I am generating programs in three different positions to take different readings and I generate the same base alignment in three different positions since it is impossible to dimension due to the geometry of the piece, which is why I am forced to rotate the fixture in three positions to take my dimensions. The problem is that I need the CAD model to rotate as well since I have to evaluate profiles and I need the CAD model

Alignmen 2.jpgAlignment 1.jpgAlignmen Base.jpg

[[Jo...]]

You can bring in 2 more cad models in the required orientation.

[[Ma...]]

Possibly it is manually tilted fixture - so can be manually measured second alignment?