[To...] Posted February 14, 2022 Share Posted February 14, 2022 Anyone have a "how to" document on how to Define Holder Location for a ZCR probe holder for an XTR head that they wouldn't mind sharing? Link to comment Share on other sites More sharing options...
[Wo...] Posted February 14, 2022 Share Posted February 14, 2022 Well I don't have a document, but it's very easy. Load a Masterprobe and hit it on the slope in the corner - done. The only confusing part might be the proper pin location on the rotating wheel. I use "7" for XTR plates and "3" for regular VAST XT plates. Link to comment Share on other sites More sharing options...
[Ri...] Posted January 31, 2023 Share Posted January 31, 2023 Please sign in to view this quote. Can someone elaborate on this? "Slope in the corner"? Which corner? Which slope? There is a slope on the edge of the holder and a larger slope on the Cover. Link to comment Share on other sites More sharing options...
[Ri...] Posted January 31, 2023 Share Posted January 31, 2023 I managed to figure it out. (mental block removed) Link to comment Share on other sites More sharing options...
[Ri...] Posted January 31, 2023 Share Posted January 31, 2023 Please sign in to view this quote. Yeah. The picture it shows isn't very helpful. For future people, it is the slope on the front left corner of the holder. Link to comment Share on other sites More sharing options...
[Je...] Posted January 31, 2023 Share Posted January 31, 2023 Tom, I have someone performing a write-up on this specific topic this week as it has come up in questions a few times. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in