Pallet Optimization

[[To...]]

If you're using a star probe or multiple RDS rotations, how does Pallet Optimization run each part.

1) Run stylus tip 1 on all parts, then run stylus tip 2 on all parts?

Or

2) Run stylus tip 1 and tip 2 on part 1, then stylus tip 1 and tip 2 on part 2?


******* REVISED POST BELOW *************************

1) Run Stylus System A - Stylus 1 on all parts, then run Stylus System A - Stylus 2 on all parts?

Or

2) Run Stylus System A - Stylus 1 and Stylus 2 on part 1, then Stylus System A - Stylus 1 and Stylus 2 on part 2?

[[Dy...]]

I believe as long as you don't use different probes for alignment its option 1

[[Dy...]]

😃

sample1.PNG

[[To...]]

Please sign in to view this quote.

Thanks for the diagram. I understand that pallet optimization runs all parts on the pallet with the same stylus system but the diagram doesn't break down to the individual styli on a stylus system. I have to assume that it runs all of the styli on the entire stylus system on first part before moving to next part.(option 2) Especially due the possibility of using special navigations within a group of features, i.e. move points or sub-clearance planes.

I will edit my original post to be more specific.