[Ja...] Posted June 23, 2022 Share Posted June 23, 2022 When I try and capture the measurement of a subsidiary radius of R.197 it will hit the adjoining plane. It is swings down to try and get the feature. I have tried to come into the feature from different clearance group and tried adjusting retrace distances to no avail. I'm using a -Z probe to get it. Capture.PNGFetching info... Link to comment Share on other sites More sharing options...
[Ju...] Posted June 23, 2022 Share Posted June 23, 2022 Have you tried using CMM Position Points before and after the measurement strategy? Link to comment Share on other sites More sharing options...
[Ja...] Posted June 23, 2022 Share Posted June 23, 2022 did you adjust for the inside or outside feature using the toggle button that is next to the name of the feature (torus or radius). Make sure that the button is set correctly Link to comment Share on other sites More sharing options...
[He...] Posted June 23, 2022 Share Posted June 23, 2022 Please sign in to view this quote. This is the way. Link to comment Share on other sites More sharing options...
[Ma...] Posted June 24, 2022 Share Posted June 24, 2022 First measure sides to get exact corner ( side and top and make cut ). Then use touch point-radius and set 45° to touch. Link to comment Share on other sites More sharing options...
[Er...] Posted June 24, 2022 Share Posted June 24, 2022 Maybe add a Meas. Ref. to the plane? Or create an intersection to reference? Link to comment Share on other sites More sharing options...
[To...] Posted June 24, 2022 Share Posted June 24, 2022 As previously stated, the Inside/Outside option probably needs to be changed. The radius selection on the subsidiary radius of a torus defaults to OD Screenshot 2022-06-24 073353.jpgFetching info... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In