[To...] Posted May 10, 2022 Share Posted May 10, 2022 Is there a way to keep Tangential Probing from being active on new features? Link to comment Share on other sites More sharing options...
[Ma...] Posted May 10, 2022 Share Posted May 10, 2022 I have it by "default" on circles and cylinders. Don't know how to turn it off 🤣 Link to comment Share on other sites More sharing options...
[Th...] Posted May 10, 2022 Share Posted May 10, 2022 Short of disabling the related option license, I'm not aware of a way to. Link to comment Share on other sites More sharing options...
[Da...] Posted May 11, 2022 Share Posted May 11, 2022 Like said before, you can deactivate the "Navigator" license, if never needed. Or you can define a preset for each feature strategy. Link to comment Share on other sites More sharing options...
[Da...] Posted May 13, 2022 Share Posted May 13, 2022 Save /load defaults. If you have an angle set for the scan as the default then it won't choose tangential. Been working for me... Link to comment Share on other sites More sharing options...
[Ja...] Posted May 17, 2022 Share Posted May 17, 2022 I have to ask "what is tangential probing"? I have never turned it on before. I found the "basics about tangential probing" in the user guide but I am still not sure. Link to comment Share on other sites More sharing options...
[Ma...] Posted May 17, 2022 Share Posted May 17, 2022 Normally tip goes to touch, then runs a circular scanning. Tangential starting close to material and running circular path slowly increasing in diameter to gentle touch material. Machininst can show you same thing with cutting tools. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in