Jump to content

Nominal/Actual Comparison view into PiWeb


Recommended Posts

Go to Characteristics Settings Editor. At top, select PiWeb Reporting and then select Display Plots in Report. Select the desired characteristic and Set to On. This should produce a full plot with plot protocol.

Alternatively, in some characteristics with the green piweb button. If you click on this button, there will be a button with a red X or a green check mark. If you have a red x, click on it to make it a green check mark. This will toggle the On/Off setting described in the first paragraph. This option is not available on CAD Presentation
Did you use the Plot Protocol? If you need both types of report, you can add a second template to the PiWeb report in the multiple report window. It will create 2 reports but you won't be able to get a full size plot in the standard protocol without customizing your template. Are we any closer?

Screenshot 2021-03-30 163253.jpg

Yes, we are getting closer!
I am able to get the view I need by adding the second plot protocol template.
It creates a full size view of all the plots though.
I would like to customize the template to get just the one plot that I want into the first template.
I've customized the template to show the plots as seen below.
Have not yet been able to figure out how to get the Nominal/Actual plot to appear.
I feel like I'm missing one little step somewhere.
Thank you,
Brian 2707_918c998f9025d178ef8ded4f0adaa2f7.jpg

Please sign in to view this quote.

The CAD Presentation will show up on the PlotProtocol as long as you have the display turned on inside of the CAD Presentation Characteristic.

In addition, if you just want it to show up (or only certain characteristics form plots), you can mark them, and then for the PlotProtocol you can turn on hide. It will only show the characteristics that aren't marked.
  • 8 months later...
Hello Eric,
I've attached a pdf that shows the steps I use to get the Nominal/Actual Comparison view onto my PiWeb report.
Hopefully that will help you out.
Brian


I noticed that two articles have been added the Knowledge Base that do a great job of explaining how to do this. 2707_918c998f9025d178ef8ded4f0adaa2f7.jpg

PiWeb.JPGAdding Nom_Actual view to PiWeb report.pdf

Another tip:
In the "StandardProtocol.ptx" there is a hidden page called "Plot". If you deactivate "hidden", you also have all large plots in the "StandardProtocol.ptx". If the large plots are to be switched individually, then set all line templates to "Detailed" on the Plot page in the protocol element.
×
×
  • Create New...