[Ja...] Posted June 14, 2021 Share Posted June 14, 2021 I am not familiar with composite positional tolerance. I have been doing some research on here and some different youtube tutorials and I think I somewhat understand it. My questions are: Will I have have two separate positional callouts for each diameter hole? One for the top (PLTZF) and one for the bottom (FRTZF)? Since the top is no different than a normal position frame, will I call this out as I normally would and then have a separate call out for the bottom? If so, how would I go about doing the bottom? I have read on here to use best fit button within the position characteristic tab? Thanks for any insight! Link to comment Share on other sites More sharing options...
[Ja...] Posted June 14, 2021 Author Share Posted June 14, 2021 Attaching a screen grab of the print for reference. Composite Position.docxFetching info... Link to comment Share on other sites More sharing options...
[Ma...] Posted June 15, 2021 Share Posted June 15, 2021 As drawing says - 55 places individually - so 2 position callouts x 55 places - lot of work 😕 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In