True Position of a Cylinder with Angle Callout

[[Do...]]

I have a true position callout on a bracket that only contains a basic angle. What is the best way to program this positional callout.

[[SH...]]

Without understanding full drawing I can't tell accurately, the dimension 25.4 mm controls coordinate in one axis, angle control the orientation, I think one dimension missing control the height of the cylinder..

[[Me...]]

There are a couple of ways to handle this... My preference is: Select the datums in your True Position characteristic (ABC), then your feature, there is a button called "Special" in the same window. Click that and you'll see location & angular offsets. Then as long as your datums represent the origin that is shown on the print, you offset to the locations shown on the print, in your case it is X & Z. Then do the rotation of your angle, you should see X & Z be ZERO in the original window.

[[Do...]]

Thanks for the response.