Mask Features, not working right.

[[Da...]]

running 2019 sp3.
In the past I would run a perpendicular line down the side of a bore, tweak it to zero, and ask for straightness. So far no problem. Then I would scallop pattern the line to 4 places around the bore . Mask the results then ask for a max Char. of the patterned line and get the max straightness to read out as 1 number.

Now it displays all four readouts and the max Char.

Tried it a couple ways it won't hide the multiple readouts. Any Ideas?

[[SH...]]

Same problem I am facing I have a true position with MMC for a radius, so I used the circle for calculating the true position with MMC .I masked the diameter used for calculating the true position but it pops out in my pi web report. I create a mini plan excluding the diameter but still it would not work.

I think if calypso use a characteristic for calculating something else, it will pop out in report that doesn't matter is masked or not..

[[Is...]]

for the Piweb reporting:
viewtopic.php?f=14&t=446

[[Ma...]]

If using PiWeb you can Mark the characteristics and hide them.
In the Definition of Multiple Reports click Mark Characteristics and turn on the ones you don't want to see.
Then make sure to check Hide.

Mark Characteristics.JPG

[[Ri...]]

Ditto to what is said above.

I've asked if they can add the Mark option to the right click menu context as it would make it a lot easier to Mark characteristics instead of the current way.

[[Da...]]

I tried a few of the suggestions here , but marking was grayed out and I couldn't find the other pages location...