[SH...] Posted July 24, 2020 Share Posted July 24, 2020 While getting zeiss training , Zeiss engineer told me while starting the machine,l mean switch on the machine the co-ordinate value x y z value on the control panel shouldd be 0 0 0. But now some time I get 0.1mm like something , I have attached the photo. This is a problem? or anyone observed like this??IMG20200723061954.jpg Link to comment https://qualityforum.zeiss.com/topic/15078-co-ordinate-value-during-machine-start/ Share on other sites More sharing options...
[Me...] Posted July 24, 2020 Share Posted July 24, 2020 Just guessing. Since the Z axis jumps when air is supplied. It could be a shift as air is also supplied to the air bearings. But Calibrates when homed. Just guessing. Link to comment https://qualityforum.zeiss.com/topic/15078-co-ordinate-value-during-machine-start/#findComment-80714 Share on other sites More sharing options...
[SH...] Posted July 24, 2020 Author Share Posted July 24, 2020 Please sign in to view this quote. Ok, good guss. But I don't suddenly on the machine just after air valve opened. I on the machine only after air pressure maintain five bar. Anyway possibility is there , I will check next time. Link to comment https://qualityforum.zeiss.com/topic/15078-co-ordinate-value-during-machine-start/#findComment-80716 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in