[SH...] Posted June 10, 2020 Share Posted June 10, 2020 Is there is any option to control the probing force of a particular stylus globally. I have a broken probe using glue I repair it. Calibration looking good, I would like to control the probing force of that probe to 50mN. Thanks Link to comment Share on other sites More sharing options...
[Do...] Posted June 11, 2020 Share Posted June 11, 2020 When you passively qualify the probe, during the manual touch part of the qualification, change the dynamic from 100% to what you feel is safe (50? 25?) and it will keep that force and apply it to any geometry you program with that probe. I will issue a concern when using a super glued probe tip. A few days ago, a super glued probe was responsible for 8 n/c tags in a row due to it moving extremely slowly over time. If you have to glue it, use some of that Gorilla super duty glue lol. the normal stuff doesn't like to stay adhered to the normal thermofit shafts. Link to comment Share on other sites More sharing options...
[Do...] Posted June 11, 2020 Share Posted June 11, 2020 Also you can adjust the force from the shown menu in Resources drop down menu.Untitled.png Link to comment Share on other sites More sharing options...
[SH...] Posted June 11, 2020 Author Share Posted June 11, 2020 Please sign in to view this quote. Thanks for the answer,we have ordered for a new prob after that we will change it. Link to comment Share on other sites More sharing options...
[SH...] Posted June 11, 2020 Author Share Posted June 11, 2020 Please sign in to view this quote. I think this can control only that feature, not for the probe... Link to comment Share on other sites More sharing options...
[He...] Posted June 12, 2020 Share Posted June 12, 2020 The force and dynamic that you enter during qualification will be the default for that stylus. Also for existing programs. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in