[Da...] Posted July 3, 2019 Share Posted July 3, 2019 I have following issue: Measurement plan 1 has corner rounding activated (set to 10), Measurement plan 2 it is set to 0. If we run plan 2 first, everything is fine. But if we run plan 1 first and then 2 after, in plan 2 it will also round the corners. In plan 2 there are some really tight travel path, so we don't want to use corner rounding there. Any ideas how to stop it for plan 2 (setting is 0 already)? Link to comment Share on other sites More sharing options...
[Ri...] Posted July 3, 2019 Share Posted July 3, 2019 You could modify your default strategy to use 0.0 "edge deviation" on paths. Then when/if you want to use an actual radii for scan path vertices you can just change the edge deviation value in that feature/s strategy page directly/individually. Link to comment Share on other sites More sharing options...
[Jo...] Posted January 22, 2020 Share Posted January 22, 2020 Dear Daniel, I also have this issue, corner rounding is activated after I run "cross slide", I tried a lot and I found set to " 0 " or " **Defalut " was unavailable, but if you set to "0.5" in the dropdown list and run your plan, the movement gonna be OK without rounding moving by naked eyes 🤣 So I set to 0.5, run my plan,and then set to 0. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in