[Cl...] Posted December 19, 2019 Share Posted December 19, 2019 In the Cook Book (pg 97, step 4) "Define the evaluation settings" - Toleranced Plane LSPL Least Squares Plane (Only probing points are calculated) Maybe a stupid question, but do they mean that a scanned surface would NOT be calculated? Link to comment Share on other sites More sharing options...
[Br...] Posted December 19, 2019 Share Posted December 19, 2019 That isn't what they mean. They are saying that It doesn't actually matter what evaluation method you use. They say to use Least Squared, but then they are letting you know that the calculation is actually coming from the individual probing points from your scan. It doesn't use the calculated feature from the evaluation. So with a runout characteristic, it looks at each individual point to see if it lands within the tolerance zone. Link to comment Share on other sites More sharing options...
[To...] Posted December 19, 2019 Share Posted December 19, 2019 To add to Brett's post, as a feature, the plane has to have an evaluation method, which by default is LSQ. Link to comment Share on other sites More sharing options...
[Cl...] Posted December 19, 2019 Author Share Posted December 19, 2019 Ok, thanks guys. Why though do the Zeiss (any) Zeiss instructions appear to have been translated directly from German to English? Many things get lost in translation. I would think they would make the instructions like a POKE YOKE fixture (idiot proof). Maybe I'm an idiot? 😃 Link to comment Share on other sites More sharing options...
[To...] Posted December 19, 2019 Share Posted December 19, 2019 Please sign in to view this quote. Because they probably are. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in