[Cl...] Posted September 30, 2019 Share Posted September 30, 2019 We are trying to pass a Gage R&R, but keep failing mainly due to one dimension. Two 45 deg angles being measured with the camera. I do two methods, one is a regular 2d line, and the other is a 2d line constructed by recalling curve points. Settings are, (Threshold - Average mean filter). The measurements are clean, but it keeps hovering around 40%. Any tips that you think might help. (543 O-inspect, Calypso 2018 service pack 2) Link to comment https://qualityforum.zeiss.com/topic/17632-angles-using-camera/ Share on other sites More sharing options...
[Ne...] Posted September 30, 2019 Share Posted September 30, 2019 Clark, Have you tried using a 3d-line for the construction? Also, do you have the filters turned on the constructed line.? Neil Link to comment https://qualityforum.zeiss.com/topic/17632-angles-using-camera/#findComment-98918 Share on other sites More sharing options...
[Cl...] Posted September 30, 2019 Author Share Posted September 30, 2019 Haven't tried 3d line yet. Filters in the lines are on. I think I'm going to change to tactile. Camera was chosen initially because of the cycle time. Link to comment https://qualityforum.zeiss.com/topic/17632-angles-using-camera/#findComment-98920 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in