[Ad...] Posted September 23, 2019 Share Posted September 23, 2019 when scanning a hydraulic cylinder that will be holding a large amount of pressure using rubber seals what would help with the best functional check, maximum inscribed, circumscribed, or LSQ ? The particular cylinder I am scanning has a diameter of 1.125 inches with a depth of 5.5 inches max inscribed results for cylinder diameter 1.12335 LSQ resultsfor cylinder diameter: 1.12524 max circumscribed results for cylinder diameter : 1.1261 Link to comment Share on other sites More sharing options...
[Za...] Posted September 25, 2019 Share Posted September 25, 2019 for functional check ID = Max Inscribed OD = Min Circumscribed Or just use Outer Tangential for either will give you the proper functional size Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in