[Al...] Posted July 29, 2019 Share Posted July 29, 2019 I am having trouble understanding the numbers I am getting from my shroud profile measurement. I'm taking a hub profile that goes from a flat plane to a slight angle (total profile is aprox. 4" long). When in an unrestricted state the profile is .0003". When I restricted the profile to the OD the it changes the flat plane to -.004". The plane is flat to .0001" and perpendicular to the OD by .0001. How can my profile change so drastically ONLY in the plane area? Link to comment https://qualityforum.zeiss.com/topic/18140-profile-restrained-to-od/ Share on other sites More sharing options...
[Ro...] Posted July 29, 2019 Share Posted July 29, 2019 Without a picture im only guessing........ Flat plane is flat and perpendicular, but it's location off by .00175 in depth (material heavy or material light) Link to comment https://qualityforum.zeiss.com/topic/18140-profile-restrained-to-od/#findComment-102082 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in