[Wo...] Posted May 1, 2019 Share Posted May 1, 2019 Hi there, Both yesterday and today I've been welcomed by Calypso with the message below. I happened almost at the same time, yesterday it was at 5:24 AM. Anyone knows what it may be? Is it server-side from Zeiss or maybe our IT guy messed with network settings? Thanks Link to comment Share on other sites More sharing options...
[Ca...] Posted May 1, 2019 Share Posted May 1, 2019 I've been seeing that a LOT too. On both our CMM's and offline seats. It doesn't seems to affect anything??? Link to comment Share on other sites More sharing options...
[Wo...] Posted May 1, 2019 Author Share Posted May 1, 2019 Even more weirdly it happens only on one of my machines - Accura2 On Accura 1 there is no message like that. Link to comment Share on other sites More sharing options...
[Ow...] Posted May 2, 2019 Share Posted May 2, 2019 I'll get this error occasionally when Calypso switches over to Gear-pro. Does your Accura 2 have a rotary table and gear pro? Link to comment Share on other sites More sharing options...
[Ch...] Posted May 2, 2019 Share Posted May 2, 2019 I get this too but have never noticed it having an impact on anything. All of my CMM's have rotary tables and both use gear pro a lot. Not sure if that has anything to do with it or not. Link to comment Share on other sites More sharing options...
[Öz...] Posted May 2, 2019 Share Posted May 2, 2019 Please sign in to view this quote. Actually this is not an error message. CMM has one controller and when you use Gear Pro there is 2 software. This message is show with which software controller is controlled. Because of this always use Gear Pro icon on Calypso and Calypso icon on Gear Pro switching beetween Gear Pro and Calypso. This way Controller always knows which software has the control. Link to comment Share on other sites More sharing options...
[Ca...] Posted May 2, 2019 Share Posted May 2, 2019 I'm running a Contura, and a Duramax, I don't have Gear-pro, or a Rotary Table. Link to comment Share on other sites More sharing options...
[No...] Posted May 2, 2019 Share Posted May 2, 2019 I also see these messages a lot. The connection is coming from a server of my company, which hasn't got anything to do with Calypso or measurements at all. Our IT guy once said something about it, but I don't remember. To get the DNS name of the server, which may hint about its purpose, you can use the ping command: Open cmd.exe and type ping -a <IP address> In the example you would type ping -a 10.0.9.237 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in