[Me...] Posted April 8, 2019 Share Posted April 8, 2019 I'm new to Calypso and have a Standard Control Panel 26 on an old Eclipse machine running Calypso 4.0.14. The machine sometimes drifts in the Y axis unexpectedly and causes unwanted points to be taken during a manual alignment. I have gone through the manual and searched online but cannot figure out how to undo the unwanted hits. I would appreciate any help on this. On Hexagon machines there is a button on the jog box for this. Link to comment https://qualityforum.zeiss.com/topic/18862-undo-a-manual-hit-during-the-manual-alignment-run/ Share on other sites More sharing options...
[Te...] Posted April 8, 2019 Share Posted April 8, 2019 You can try F4 or select cancel point on the screen. If it is the last point of the feature you are out of luck and have to start over. Link to comment https://qualityforum.zeiss.com/topic/18862-undo-a-manual-hit-during-the-manual-alignment-run/#findComment-106152 Share on other sites More sharing options...
[Me...] Posted April 8, 2019 Author Share Posted April 8, 2019 I do all of my features as individual points so I guess I just have to start over. Luckily the alignment is only 7 points. Thanks for the reply. Link to comment https://qualityforum.zeiss.com/topic/18862-undo-a-manual-hit-during-the-manual-alignment-run/#findComment-106154 Share on other sites More sharing options...
[Ro...] Posted April 9, 2019 Share Posted April 9, 2019 7 points? You should use a start alignment and get it down to 3 🙂 Link to comment https://qualityforum.zeiss.com/topic/18862-undo-a-manual-hit-during-the-manual-alignment-run/#findComment-106156 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in