[Ma...] Posted March 12, 2019 Share Posted March 12, 2019 Does anyone know why my arrows are skewed I tried different probes and requalifying everything? thank you[img][/img]arrrows.png Link to comment Share on other sites More sharing options...
[Te...] Posted March 12, 2019 Share Posted March 12, 2019 If you are using a Star Probe on an XXT that may be normal. If you are not I am guessing you maybe going to fast. Link to comment Share on other sites More sharing options...
[Cl...] Posted March 12, 2019 Share Posted March 12, 2019 What is the surface finish on that edge? If it's too rough, that could be the issue. Link to comment Share on other sites More sharing options...
[Kl...] Posted March 13, 2019 Share Posted March 13, 2019 Hello Clark It's typical for scanning run. There are two force directions stored by the Controller: - 1st Measuring force perpenticular to surface - 2nd friction parallel to moving path The effect is a tilted actual force vector which is normal for sanning regards Klaus Link to comment Share on other sites More sharing options...
[Cl...] Posted March 13, 2019 Share Posted March 13, 2019 Thanks, guess I never actually paid that close attention to it. Link to comment Share on other sites More sharing options...
[Am...] Posted March 19, 2019 Share Posted March 19, 2019 While it is normal to see something like this I believe that feature is being measured too fast, if you slow down your scanning speed I think you would see the vectors would straighten out a bit more. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in