[Me...] Posted October 19, 2018 Share Posted October 19, 2018 Hello there, I need to create what we call a Roll Dimension (Perpendicularity) between a sphere and a cone. I have enclosed a drawing of what I need to do. Any help will be greatly appreciated. Thank you in advanced.2426-DET-23-STRIPPER-RING .pdf Link to comment Share on other sites More sharing options...
[Sh...] Posted October 20, 2018 Share Posted October 20, 2018 Are you still looking for help? Link to comment Share on other sites More sharing options...
[An...] Posted October 22, 2018 Share Posted October 22, 2018 Hello Tony Armas Designers always make it easy for themselves, drawing a few strokes on a piece of paper is always easy! Unfortunately I have no idea how to solve the problem, especially since the circle/sphere does not really exist! 🙄 An idea would be, a virtual circle on which one puts a tangent, which has the same angle as the cone, unfortunately I also never put a ghost geometry! ❓ Link to comment Share on other sites More sharing options...
[An...] Posted October 22, 2018 Share Posted October 22, 2018 See attached.Perpend_Cone_Sphere_1a.pdf Link to comment Share on other sites More sharing options...
[Me...] Posted October 22, 2018 Author Share Posted October 22, 2018 Thank you guys, I was able to figure this out and I am happy to report it actually is working quite well. 😃 😃 😃 😃 😃 😃 😃 😃 😃 😃 😃 😃 Link to comment Share on other sites More sharing options...
[Da...] Posted October 22, 2018 Share Posted October 22, 2018 The engineers at the mold manufacturing shop that I worked at a few years back used to put these old school plate readings all over the prints we had !!! 🙁 🙁 🙁 I was able to convince them that a diameter at a gage line was better and faster than these crazy setups. We changed quite a few things and only got more accurate and efficient !! SHOW THEM THE WAY !!! 🤣 🤣 🤣 Link to comment Share on other sites More sharing options...
[An...] Posted October 23, 2018 Share Posted October 23, 2018 An error has occured! See attached.Perpend_Cone_Sphere_1b.pdf Link to comment Share on other sites More sharing options...
[Me...] Posted October 24, 2018 Author Share Posted October 24, 2018 Hello Andreas, Thanks for rechecking the roll dimension, please explain were is the error, I double check their dimension and did not see any errors.? please see the attachment. The sphere is tangent to the outside diameter and tangent to the bottom of the part (or Z 0) same thing. ❓ ❓ ❓ ❓ ❓ ❓ ❓ ❓ ❓ ❓ ❓ ❓2426-2.pdf2426-1.pdf Link to comment Share on other sites More sharing options...
[An...] Posted October 24, 2018 Share Posted October 24, 2018 Please sign in to view this quote. The error was located in my first pdf,and I corrected it in my second pdf. The measurement procedure is described in the attached pdf,regarding different dimensions. The radius of the adjacent sphere is a value of the triple offset of the coordinate system.Perpend_Cone_Sphere_1c.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in