[Jo...] Posted Tuesday at 09:58 PM Share Posted Tuesday at 09:58 PM We have not issue of not able to get the Quality Class Nominals & Actuals data to show on the printout. We do not have the latest Revision & Patches, but have seen missing check boxes in the Tolerance tab. In our old previous version (2016) it's does shows, but after we upgraded to version 2018, it seems to be missing for the ones we enabled, Profiles & Leads. It's still showing for other features, just not on all of them. I have attached some pdf printouts and images detailing this issue. Hope someone may shed some light. Could be just parameters I'm missing, or maybe different version have different Quality Class table of Tolerances. Link to comment Share on other sites More sharing options...
[Ro...] Posted Wednesday at 05:26 AM Share Posted Wednesday at 05:26 AM Hello, if no tolerance class is offered, then the geometry data usually does not conform to the scope of the standard. For an accurate answer, I need either the .act file of the measurement or the complete geometry data accordingly. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in