[Sh...] Posted March 25 Share Posted March 25 Is there a way to rotate a ZAS head to 0 Degrees via PCM? Link to comment Share on other sites More sharing options...
[Cl...] Posted March 25 Share Posted March 25 Not sure what a ZAS head is? I use this (post settings) to rotate my rotary to zero. rotateReference(0) Link to comment Share on other sites More sharing options...
[Sh...] Posted March 25 Author Share Posted March 25 Zeiss Articulating Stylus. Similar to the RDS but only rotates in one direction. Link to comment Share on other sites More sharing options...
[Ch...] Posted March 25 Share Posted March 25 Shawn, does ZAS have different individual stylus like an RDS? If so, I'd just recommend putting a 'stop' intermediate point with stylus at A0B0 position in the last feature - or perhaps use an 'End Park Position'. With PCM - I suppose we could theoretically 'change Stylus', but not knowing where the probe is when this id changed could be dangerous. Link to comment Share on other sites More sharing options...
[Ri...] Posted March 25 Share Posted March 25 The ZAS behaves the same way as an RDS with CAA turned on. I'm sure there is a command to set the stylus angle, but I'm a novice at PCM, so I haven't ran into that yet. Link to comment Share on other sites More sharing options...
[Ch...] Posted March 25 Share Posted March 25 if you have a stylus qualfiied at this angle, we can use PCM to set this stylus active. to actually rotate - I'd have to investigate - probably do-able. Link to comment Share on other sites More sharing options...
[Ri...] Posted March 25 Share Posted March 25 No active stylus. You just set the angle inside of the feature strategy. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In