[Vi...] Posted Wednesday at 11:57 AM Share Posted Wednesday at 11:57 AM (edited) i want to confirm machine is reaching to axis limit or not, how can i will get this alarm in calypso planer . Edited Wednesday at 11:58 AM Link to comment Share on other sites More sharing options...
[To...] Posted Wednesday at 01:41 PM Share Posted Wednesday at 01:41 PM This might be what you're looking for. Link to comment Share on other sites More sharing options...
[Vi...] Posted yesterday at 09:50 AM Author Share Posted yesterday at 09:50 AM I want alarm for machine axis limit while running simulation. Link to comment Share on other sites More sharing options...
[Vi...] Posted yesterday at 10:10 AM Author Share Posted yesterday at 10:10 AM Link to comment Share on other sites More sharing options...
[No...] Posted 16 hours ago Share Posted 16 hours ago I don't know about the new simulation model in Calypso 2025, but up until 2024 there are no such alarms. Even worse, if you direct the CMM to travel far beyound its limits, it will happily do so: Link to comment Share on other sites More sharing options...
[Vi...] Posted 12 hours ago Author Share Posted 12 hours ago yes,that is the issue i am facing not getting alarm for axis limit. Link to comment Share on other sites More sharing options...
[No...] Posted 11 hours ago Share Posted 11 hours ago (edited) Well, the original concept of Planner/Simulation was to enable offline programming and collision testing between CMM parts/styli and the workpiece. It was never meant as an accurate simulation of the physical CMM's mechanics. But yes, it's a bit embarrassing that the simulated CMM doesn't even KNOW its physical limits. It should at least stop there. Edited 11 hours ago Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in