[Ed...] Posted May 27 Share Posted May 27 Hi, Using Calypso (7.2.04) and PiWeb plus (7.8.9) I am measuring, as explained in my earlier post, 9x11 products on one plate. I do this using patters and loops. In my attributes I give my nominal and tolerances, as you always do, in this case for example 1.5mm. Yet in my final report it gives me a nominal value of 1.470. How do I resolve this discrepancy? Kind regards. Link to comment Share on other sites More sharing options...
[Ed...] Posted May 27 Author Share Posted May 27 Updated to the latest version of Calypso 21 - but had no effect. Link to comment Share on other sites More sharing options...
[An...] Posted May 27 Share Posted May 27 Have you made any modifications to the report template? Link to comment Share on other sites More sharing options...
[Ed...] Posted May 27 Author Share Posted May 27 Please sign in to view this quote. Hi Andy. This I could not tell you as I have taken over from someone else here, only quite recently. However, the interesting part is that when I cut out the loop the report immediately gives the right nominal again. When I bring back in the loop, the nominal is back to old - and wrong. ZEISS is having a look at this too, but are having a hard time figuring it out. Link to comment Share on other sites More sharing options...
[An...] Posted May 27 Share Posted May 27 Very odd. I can't say I've seen that one before and I've seen a lot of weird PiWeb stuff. Let us know what the resolution ends up being. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in