[To...] Posted June 2 Share Posted June 2 I am wondering if there is a way to have a report automatically pop up at the end of our probe qualification program showing the results of all the probes. Example S result and sizes. Link to comment Share on other sites More sharing options...
[An...] Posted June 2 Share Posted June 2 A result element with the following will give the sigma value for the specified stylus: getProbe("STYLUS","STYLUS SYSTEM").stdProbeDev Link to comment Share on other sites More sharing options...
[Ke...] Posted June 2 Share Posted June 2 Using Result Element and in the formula box enter getProbe("XX","XXX").stdProbeDev for Sigma value and getProbe("XX","XXX").radius for size. XX is Stylus and XXX is Stylus system. Link to comment Share on other sites More sharing options...
[Ri...] Posted June 2 Share Posted June 2 Take a look at this program. It captures the sigma prior to running qualifications and then reports the new sigma after. It is for an XTR Sensor and a standard rack of 12 probes we use. It may help you get started. PQ_Setup for 56683-3_Rack_10-29-2024.zip Link to comment Share on other sites More sharing options...
[An...] Posted June 10 Share Posted June 10 This is what you are looking for. Two methods including the one mentioned earlier using getProbe result elements and additional formulas for radius and other probe dimensions. https://portal.zeiss.com/knowledge-base?id=471470 Link to comment Share on other sites More sharing options...
[To...] Posted June 11 Author Share Posted June 11 Thanks. I am able to get a report now, but I am wondering what I should set for my sigma tolerances. I've heard anything under .001 is acceptable but also heard that is should be no more than .0002. What is an acceptable sigma number to ensure accurate measurements? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in