Jump to content

Reverse circle scanning path


---
 Share

Recommended Posts

---

Please see attached . Does anyone know how to reverse the circle scanning path ?  For whatever reason if I scan a radius path from left to right the stylus falls off the geometry. I need to scan from right to left.

scan.PNG

Link to comment
Share on other sites

  • 1 month later...

Add the angle range value to your starting position value. Then change your angle range into a negative.

image.png.a27e24eab7bc141d0d606a7914508347.pngimage.png.7b7cfdda4a6d23ab9b910f26f99c12c9.png

Link to comment
Share on other sites

  • 2 weeks later...

If you're falling off something needs to be adjusted.  Consider an alignment.  Depending on what you've got there, consider a self-centering point with a big stylus (don't forget to select "midpoint" in the evaluation tab) to "find" the feature, X/Y zero at that point, and then come in for your scan invoking this alignment.

Or try moving one or both ends of your scan in one degree.

Link to comment
Share on other sites

 Share

×
×
  • Create New...