[To...] Posted Tuesday at 03:24 PM Share Posted Tuesday at 03:24 PM When I started programming the person who taught me said to never use filters or outliers for curves. I'm beginning to think that was not the best information. What kind of filtering should I use for curves. Most of our curves are for cams with .0005"-.001" profile tolerances. We also use it for forming tools with +/- .001" tolerances. Link to comment Share on other sites More sharing options...
[Cl...] Posted Tuesday at 03:57 PM Share Posted Tuesday at 03:57 PM I had good results using the spline filter (if an open curve, gauss if closed) with the curve length /2 = the wavelength LC. Link to comment Share on other sites More sharing options...
[To...] Posted Tuesday at 04:25 PM Author Share Posted Tuesday at 04:25 PM What exactly do you mean by "with the curve length /2 = the wavelength LC" Link to comment Share on other sites More sharing options...
[Cl...] Posted Tuesday at 05:44 PM Share Posted Tuesday at 05:44 PM (edited) Pull the curve into Size > Curve Dimensions > Curve Lenth. Divide the answer by 2. That number will be your wavelength (Feature evaluation > Filter). Edited Tuesday at 05:45 PM Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in