Program loading problem

[[Ni...]]

When launching any of the programs installed on the machine—programs we have been using since the machine was put into operation—the loading time is extremely long. It takes almost two minutes before the software becomes responsive and any action can be performed. The programs are stored locally on the computer, and the system is not under load during startup; CPU usage does not exceed 10% while the programs are opening. Has anyone encountered a similar issue?

[[Jo...]]

Are these big programs? Complex models?

I see similar issues, but these are typically with bigger programs with over 100 features/characteristics. CAD model complexity can also impact load time i have noticed. 

Do you see the loading delay when opening simple programs?

[[Ja...]]

May be worth looking to see what you C:Drive storage capacity is at. I believe Zeiss recommends 10GB of free space and if it starts to get really full sometimes weird errors or lag could occur. We usually get a pop up warning if the drive is close to full and every few years our IT has to go in and fix a Window's indexing issue that frees up about 150GB.

I attached an instructional we got from Zeiss with some more info if you find that your drive is full.

CALYPSO - PC Disk Space Full.DOCX

Edited 6 hours ago