Pallet setup

[[He...]]

Good morning gentlemen,

I have new project and need to get 15 pieces run at once which I have not done before. Could you please guide me how set up the pallet run?

Thanks in advance.🙏

[[Mi...]]

Hello, 
           You may want to check out the tech guide articles below regarding breaking up your measuring volume to measure multiple parts at once. 

https://techguide.zeiss.com/en/zeiss-inspect-2026/article/cmd_atos_create_cuboid_working_area_partition.html

https://techguide.zeiss.com/en/zeiss-inspect-2026/article/cmd_atos_create_segment_working_area_partition.html

[[He...]]

Hello Mike,

Thank you for sharing the information.🙏

Edited May 5

[[Mi...]]

You're Welcome! 

If anyone needs help creating a working area partition (cuboids) you can see the knowledge base article below. 
https://portal.zeiss.com/knowledge-base?id=3926138

[[Mi...]]

If anyone needs help creating a working area partition (segments), please see the knowledge base article below. 
https://portal.zeiss.com/knowledge-base?id=3931483

[[Jo...]]

Unless I am misunderstanding what you're looking for, I recommend using Autorun. 

You can add a pallet of parts, input the XY offset, and run the entire pallet with a few clicks. This allows you to be able to walk away from the machine while measuring a number of parts. 

Here is a guide I helped develop in a past job.

AutoRun_Guide_2019 (2).pdf