Measuring Actual data with no CAD

[[Ke...]]

How would i take my actual scan data and show low/ high spots? I don't have CAD but is there a way to show flatness in a form of where the part has deviation? I understand the Flatness call out but being able to show something along the lines of deviation labels?

[[Jo...]]

You could compare it to the mesh of a reference sample. You can load that as CAD.

for flatness this is possible like so:

• build an alignment
• build a plane
• check the plane for flatness
• go to properties and activate "show colour ..."
• put some deviation labels on if you like

Also works for other geometric elemnts

Edited August 6

[[Ke...]]

When i load it as a CAD model there is ZERO deviation. How would i show Actual mesh data having low and high spots without using CAD model?

[[Jo...]]

When you load the same mesh as CAD it should show no deviations. Working as intended.

Thats why i mentioned a reference sample or master part.

 

To my knowledge, you can`t compare freeform without a CAD. The CAD is the information for the comparision.

 

[[Ma...]]

1. Create a plane.
2. Create a flatness
Double-click the result. A window will open on the right side.
Display. Enable color display.