ATOS Q - Calibration

[[Cr...]]

We just got the ATOS Q 8M with ScanPort, and I am trying to calibrate the MV50 lens. I can get Position 1 to pass. My question is: how do I move the ScanPort for the next position 2 without exiting the calibration window?"

[[Ri...]]

The ScanPort has its own app for calibration. It will handle it for you. Though I'm not certain if the normal ScanPort app handles the MV50 by default. 

[[Jo...]]

MV50 will probably be problematic due to vibrations and movement checks.

You can use the scanport app --> full calibration.

Or use a tritop.

 

Edited August 13

[[Cr...]]

Jochen, thank you for the suggestion. I am using MV270 lenses, Calibration worked until I had to tilt 45 deg, and I can't figure out why it's saying 'WRONG TILT DIRECTION' and how to proceed. I attached a image with the calibration panel set-up.

[[Ri...]]

Please sign in to view this username.

I believe you have the grid plate rotated 180°. 

[[Ma...]]

Please sign in to view this username.

 i think he is allright.

That 4 points in the middle is oriented correctly ( at least from lower camera images ) and accordingly to picture hints.

What i don't understand is why there are 4 camera screens displaying different things.

[[Jo...]]

Looks about right on the picture. Is that the plate for 270? Looks the same size as our 350 plate. for the 350 i had to remove the rotation table to make it work on the scanport.

In general:

You have two angled positions where you have to move the whole stand facing opposing directions.

Inbetween you have two rotate the calibration plate.