Masterprobe and Probing System Qualification program

[[Ze...]]

Hi all,

If I put a Probing System Qualification in my probe calibration program for the Masterprobe at the beginning, and use Geometry Requalification, does it update the reference sphere position and then calibrate the Masterprobe? I'm trying to understand if I need to manually find the RS position each time with the Masterprobe at the beginning of an autocal program, or if it finds it during the geometry requalification? If so, is there a search distance it uses to locate the RS? If not, how do I update the RS position automatically at the beginning of the program before autocalibrating all the other probes?

Hope that made sense. 

[[Ma...]]

I am doing manual position, then program, but i think i'll try sphere on different position with one probe - i am curious too.

[[Ri...]]

I have one calibration program with a VAST XT Gold sensor; we automatically qualify the MasterProbe.

The Reference Sphere (RS) is always in the same place on this setup (It's on a Micura 5x5x5). The RS is removed when running products and put in place when running qualification every Monday. It is located on an Inspection Arsenal plate.

We do not have to manually reference the RS, it is all automatic.

We use default search distance that is setup when you define the MasterProbe.

Edited 45 minutes ago