Where are inspection plan-specific PiWeb forms stored?

[[Ka...]]

Hi,

Simple question, sorry...

PiWeb reporting forms:
General stored here: C:\Program Files (x86)\ZEISS\CALYPSO 7.4\PiWebReportingTemplates
Own generic reports here: C:\Users\Public\Documents\ZEISS\CALYPSO\protocol\PiWebReportingTemplates [ Configured PiWeb Path in Calypso ]
But where to store the plan-specific PiWeb forms?

Neither of them works.
A) C:\Users\Public\Documents\ZEISS\CALYPSO\workarea\inspections\myplan [configured inspection plan path in Calypso]
B) \\fshare\machines\Zeiss\production\myplan [real store place of loaded inspection plan ]

[[Ri...]]

Typically, they are here:

C:\Users\Public\Documents\Zeiss\CALYPSO 7.4\protocol\PiWebReportingTemplates

Change the "Calypso 7.4" to your install name.

[[Ch...]]

Moin Karsten,

 

bei uns liegen sie z.B. auf dem Server rum. Schau mal Extras: Arbeitsumgebung: PiWeb ...   schau mal was da bei Dir da steht.

[[Ka...]]

Hi Ruchard,

Well that's the origin of the own generic reports. I'm looking for the storage location for templates that are tied only to a specific program.
See the third section in German: "Prüfplanspezifische Vorlage"  ->  Inspection Plan-Specific Template

 

[[Ka...]]

Moin Marti,

Ja, bei uns ( noch ) lokal nach C:\Users\Public\Documents\ZEISS\CALYPSO\protocol\PiWebReportingTemplates
 Die Vorlagen die ich dort ablege sehe ich in dem Reiter "Generische Vorlagen". Es gibt ja aber noch den Reiter "Prüfplanspezifische Vorlagen". Der ist leer und ich wüsste gern wohin der Pfad da zeigt.
Für bestimmte Programme benötige ich spezielle PiWeb vorlagen ( leider ). Die sollen aber auch definitiv an dieses spezielle Programm gebunden sein anstatt irgendwo global oder bei uns noch lokal.

[[Ri...]]

Do you mean when the template is dumped in the CMM program itself?

Then, look for a PiWeb folder in the CMM program. "PiWebReportingTemplates"

Edited yesterday at 01:06 PM

[[Ka...]]

Ahhhh,
We need an folder named PiWebReportingTemplates within the CMM folder. Thats a nice crypt: Security by obscurity 🙂
Thanks a lot, i will try it tomorrow morning: End of long shift now. 

[[Pi...]]

Inspection plan specific reports are stored in each inspection plan folder.

For example if you use default inspection plan location - which is (in my case):

C:\Users\Public\Documents\Zeiss\CALYPSO 8.0\workarea\inspections

then inside I have Inspection plan called - Probe_Calibration_Test

If you will create measurement specific report then your location for that report should be:

C:\Users\Public\Documents\Zeiss\CALYPSO 8.0\workarea\inspections\Probe_Calibration_Test\PiWebReportingTemplates

 

All measurement specific reports are set to be saved directly inside inspection plan folder - to avoid situation that you will copy program to the other PC and you will miss report required to output results.

I hope that helps.