[Ca...] Posted October 22 Share Posted October 22 Hello CMM Team, I want to select dynamically a set of dimensions, so we can create ad-hot miniplans This is an example. Normally all the checkBoxes are selected, but if you select only a few, a LIST with these dimensions or characteristic is created and ready for a PreSettings. The Issue is when I try to measure some Characteristics that need features not defined in the alignment. Here an example of the questions by the Calypso system: Some ideas to avoid create a list ddME before calling setCF. 1 Link to comment https://qualityforum.zeiss.com/topic/27720-setcf-for-dynamic-selection-of-characteristics/ Share on other sites More sharing options...
[Je...] Posted October 23 Share Posted October 23 (edited) you can use addME("Feature1", "Feature2",etc) to predefine all needed Features. If you use this, you will have to run from feature-list. Edited October 23 1 Link to comment https://qualityforum.zeiss.com/topic/27720-setcf-for-dynamic-selection-of-characteristics/#findComment-157308 Share on other sites More sharing options...
[Ca...] Posted 3 hours ago Author Share Posted 3 hours ago I got an issue in the Zeiss Calypso system: I have experimented with the external software to automate the Characteristics to measure (Like a MINIPLAN but "on the fly"). 1. I have created the specific instructions addME for the correspondent Characteristics. They aapears in order of excecution of FEATURES. (regardless of redundancy) and the same experiment with / without redundancy, in order and out of features order (EVER RUN FROM FEATURE LIST) addME("IntCone","IntCone","2D Curve1","2D Curve2","2D Curve3","2D Curve4","BottConePlane") //===> (redundancy "IntCone" and in FEATURES order) addME("2D Curve2","2D Curve3","IntCone","2D Curve1","2D Curve4","IntCone","BottConePlane") //===> (redundancy "IntCone" and out of FEAT. order) addME("IntCone","2D Curve1","2D Curve2","2D Curve3","2D Curve4","BottConePlane") //===> (no redundancy in FEATURES order) addME("2D Curve2","2D Curve3","IntCone","2D Curve1","2D Curve4","BottConePlane") //===> (no redundancy and out of FEAT. order) [ in ALL CASES the program RUN without problems and in order of FEATURE LIST ] no issues ONLY WHEN I WRITE EXPLICITY THE CODE on PCM ] 2. When I try to write the code using external txt file automatically, here the PCM addME(readListFile(FOLDER_BASE + "SelectorDim-" + PLANVERSION + "\addMEList.txt")) //===> addMEList is created on the fly THEN I GET THIS ISSUE OR MESSAGE: SOME IDEAS PLEASE TO MAKE A REAL AUTOMATION WITHOUT THESE MESSAGES Link to comment https://qualityforum.zeiss.com/topic/27720-setcf-for-dynamic-selection-of-characteristics/#findComment-158488 Share on other sites More sharing options...
[Ca...] Posted 1 hour ago Author Share Posted 1 hour ago //============> SOLVED SOLVED SOLVED <======================== When you want to AUTOMATE at-hot or on the fly a PLAN!!! 1. Create a text file but not in the same format as a handwritten "addME("ME0001",...,"ME000n") but in the format: ME0001 ME0002 ... ME000n That is, with the newline or return at the end of each line 2. Then, you can with ===> readListFile() obtain the new LIST of ME: addME(readListFile(PathFile)) That is because the internal format of addME is not the same defined or showed in the sentence addME("ME0001",...,"ME000n"). This was my ERROR. Well community, I try to hold the FEATURE LIST order, but I have experimented and any way, not order, redundancy....order...alll was functional and OK Link to comment https://qualityforum.zeiss.com/topic/27720-setcf-for-dynamic-selection-of-characteristics/#findComment-158492 Share on other sites More sharing options...
[Ca...] Posted 10 minutes ago Author Share Posted 10 minutes ago (edited) Here the format of the txt file to use in the addME. I was experimenting with order, redundancy ... and all models were OK, but try when possible, to use in FEATURE LIST. Edited 7 minutes ago Some commentary about the picture. Link to comment https://qualityforum.zeiss.com/topic/27720-setcf-for-dynamic-selection-of-characteristics/#findComment-158498 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in