Correct point type

[[Cl...]]

I'm probing points on two opposing planes, recalling those points into a symmetry point for a
position callout. Does it really matter what type of point I use? E.g., Plane point, Touch point, etc?
I ask because I'm having a repeatability problem.

Thanks in advance.

[[Ma...]]

It can have an impact.
I usually do plane point(?) it should have fixed nominal vector, so XYZ is correct more than space point ( or that default one )

[[Cl...]]

I was using the Plane Point initially, but was seeing bad repeatability, so I thought I'd start there.

[[Ma...]]

Can you use symmetry point instead of two seperate points just to clarify if repeatability is bad only on 2 points then on SP?

[[Cl...]]

Good idea. I'll try that next.

[[Da...]]

In my experience, evaluation settings of the source elements have no influence when I use 'recall points'.

[[Cl...]]

I switched from recalling points into a symmetry point to actually probing a symmetry
point. That gave me a more accurate width measurement between planes which I was
also using the symmetry point for.