Flächenform

[[6b...]]

Hallo zusammen,

ich benötige kurz Hilfe:
In der Zeichnung ( siehe Bild 2 ) wird eine Flächenform zum Bezug A+B gefordert.
Allerdings sagt er mir am CAD-Model, dass die Geometrie nicht gültig ist. ( siehe Bild 1 )

Wie kann man diese Stelle denn sonst vermessen? ( siehe blauer Kreis )

Um eine Antwort wäre ich sehr dankbar.

Gruß Mirco

Bild 1.PNGBild 2.PNG

[[Ma...]]

I don't know what base A and B is, but this can be done by using free form - but it looks like torus.

[[Cl...]]

Free form surface - Extract from faces. I don't have access to
Calypso right now, but I think it's under CAD > Creating Features?

[[6b...]]

I haven't found anything under CAD, thanks anyway

[[6b...]]

I set 20 spatial points at this point and then joined them together in the free-form surface with point recall.
Output then as a free-form surface.
At least it worked.

[[Er...]]

CAD/Create Features just like Clark Gilbert mentioned works great. Click on Point Set, and for the Feature Drop Down select Free Form Surface, and for General Path you have a couple of options that work really well like from Surfaces, or 4 points. I use this quite often, for features like the one shown here.

[[6b...]]

Thank you Eric
It worked 🙂
But a plot output of the surface shape is not possible then, is it?
>>>> see screenshot .
In any case, I have not found anything 🙁
Maybe you have an idea.

Many thanks in advance

[[Ma...]]

With my PiWeb templates i don't have plot for this either.
Use CAD evaluation if it's still available.

[[6b...]]

OK Thanks Martin

[[Er...]]

Also, under Cad Evaluation you can check the box for Min/Max Points, and it will tell you the best and worst result. Very useful for me when reporting adjustments needed to the machinists.