Setting up Nikon D7500 Photogrammetry Camera to communicate with ATOS Triple Scan over WiFi? (V8 SR1)

[[Mi...]]

Hello!

We have recently upgraded our photogrammetry camera from a Nikon D7200 (with wireless transmitter attachment) to a Nikon D7500. We chose to upgrade because the old camera's wireless transmitter was no longer functioning properly and we had to transfer images to the scan PC via SD card, however the new camera has built-in WiFi capabilities that we hoped would allow us to once again transmit photogrammetry images to the scan PC in real time, saving us several minutes of waiting on the SD card. We have been successful in connecting the camera to the PC, however the V8 SR1 software isn't recognizing the connection. We suspect this is because the D7500's internal WiFi appears to be acting in place of the photogrammetry network router supplied with the Triple Scan, rather than transmitting to it, but we're at a loss as to how to point the ATOS software towards the camera's signal. Has anyone else been able to successfully connect a D7500 camera to the ATOS/Tritop software, or know what camera/network settings we should investigate?